Legend Overview
The Legend is your typical black mid tower case we are used to seeing. According to the Diablotek website the case only comes in black, it would have been nice to see a silver or white version. When I picked up the case I noticed it was very light. I thought the case might have been made of aluminum, but it is made of SGCC steel and a plastic front bezel.
Looking at the front of the case Diablotek has gone with a mesh design. This obviously helps with airflow. Starting at the bottom of the case there is a single 3.5-inch external bay (Who still uses these?). Above that you have three 5.25-inch drive bays. All the way at the top you have the front panel connections which include two USB 2.0 ports and audio connections. You also have power a reset buttons.
Moving around to the side of the case you can see it is pretty much plain except for the large set of ventilation holes. Here you can house two 80, 90 or 120mm fans. There is also a handle on the end of the side panel that makes it easier to remove the side panel.
When you take a look at the back of the case you can really see how thin this case is, this could be a concern when installing our system. I do like that the power supply is mounted on the bottom of the case. There is a spot for a 80, 90 or 120mm exhaust fan and 2 water-cooling holes towards the top of the case.
On the bottom of the case are 4 small feet that will left the case up off the ground for good airflow. There are 2 dust filters on the bottom of the case. On each side panel you have a set of thumbscrews, these thumbscrews are the plastic ones.
