Case Mod Friday: Project Rhino

Project Name: Project Rhino

About this mod / project:
Hello guys! Ever since finishing the R40 Engineering Station I have had an itch to start a new project, so I will cut straight to it. The case I will be building in this time is a prototype of the upcoming HEX GEAR R80, a full size ATX case with plenty of space for a LOT of hardware, as I will do my best to prove.

This build proves as a “test build” in the prototype case to make sure that it has the thermal capacity, and space that is needed for an ultra high-end build. And what better way to do this than to cram all sorts of expensive, powerhungry and hot hardware into it!

I will be keeping this build very clean, as it serves as a statement of what you can do with basic tools in this case (so not crazy water distributing plates, sorry!)

I would also like to give a huge thanks to the sponsors that has provided parts for this project, and helped make it one of the most powerfull PC’s possible to build. I would also like to thank the team from Official Nordster for the Rhino artwork in the banner.

Photos:

13227503_1351293671554268_5561412137297073687_o 13227331_1351293524887616_4015172012549382938_o 13221415_1351293698220932_2294018417323885905_o 13221172_1351293611554274_4732453296640270574_o 13220755_1351293708220931_4490933422457035687_o 13220657_1351293841554251_2907914643264119194_o 13220533_1351293721554263_7131249918388021268_o 13217304_1351293804887588_2984052116196420992_o 13217119_1351293754887593_8483344013530662457_o 13198483_1351293861554249_7574657705016938200_o 13198480_1351293794887589_5405462437511170773_o 13198449_1351293868220915_4224287615689239032_o 13198379_1351293571554278_6677421882949812264_o 13173352_1351293768220925_1248240926565245851_o 13173163_1351293564887612_1117067829147892279_o 13161904_1351293521554283_7335326420138998586_o 13147784_1351293871554248_3392084850420020096_o 13147784_1351293584887610_9173306718418993397_o 13116360_1351293778220924_8324001323918719181_o 13112779_1351293528220949_8106081558032232541_o 13064710_1351293538220948_1866738597544529893_o

Hardware:
Case: HEX GEAR R80
CPU: Intel i7 5960X
Graphic cards: 4 x Nvidia Geforce GTX Titan X
OS drive: Intel 750 ssd 1.2TB PCIe
Secondary drive: KLEVV Urbane 480 gb ssd
Motherboard: ASUS X99-E WS
RAM: 64 GB KLEVV CRASS DDR4 ram
PSU: Corsair AX1500i
Fan controller: Aquaero 6
Watercooling: EK blocks, radiators, reservoir & pumps
Fans: EK vardar
Fittings: Bitspower
Sleeving: E22
Tubing: E22 solid tubing

Mods:
– Custom mounts for pumps and res
– Custom sleeved wiring everywhere!
– Cable combs installed
– Custom hard tubing
– Custom water cooling loop

Build Log: LinusTechTips

Builder: p0Pe

Do you want your mod to be featured on Case Mod Friday? Submit it here: https://thinkcomputers.org/case-mod-friday-submission/

About Author