Shield Micra Overview & Installation
The Shield Micra is an all clear case, which are quite popular because the iPhone 4 is such a pretty device. This case is what I called a back case, which means it does not have any front covering at all. So the back and side of the phone is what is protected.
On the left side of the case you have 2 openings, one for the mute switch and the other for the 2 volume buttons. The other side of the case is all plain, not much to talk about there.
Both the top and bottom of the case are open for the power button, headphone jack, dock connector, and speakers.
On the back of the case there is a small Belkin logo towards the bottom. Towards the top there is an opening for the camera and flash.
Installing the iPhone 4 into the Shield Micra is actually pretty simple. Angle the phone so that the left side is in the case then just press down and lock in into place. It really is that simple.
