Overview
Upon removing the product from its packaging, you should have the following: the SoundBar, one 3.5mm Multi channel Audio cable, four rubber feet, four 1” metal riser feet and of course the instruction manual. One the bottom of the Cine5 you have four threaded areas where you can screw in either your rubber low profile feet or the metal 1” risers.
After putting the Feet on you get a nice and clean look that matches the trim of the Cine5 while lifting the SoundBar up off your desk. There is an easily accessible metal Volume button on top for turning the volume up and down and with a push of the button you can mute the Cine5.
Turning the ASUS Cine5 you see there is a bass reflex port on both the right and left sides. This provides even bass when placed on your table top. They also added a metal ASUS badge to the front of the Cine5.
On the back of the ASUS Cine5 you can see a glossy finish rounds out to the bottom of the SoundBar. You will find the inputs for the power cord, along with the front, side, and center/sub, and a headphone jack. Finally, on the back of the Cine5 is power button to turn the Cine5 on and off.
