Overview
The AeroCool Touch 2000 is a panel and fan controller hosting up to four fans and four different temperature readings. Its 5″ LCD screen panel will slide into two empty bays in your case. The brushed aluminum front bezel should match nearly any black case. Two USB, an eSATA, and mic/headphone inputs are found underneath the screen, on the bezel.
The panel is only 2.8″ deep and is supported by two steel brackets on either side, each having a slit in the middle to allow for space between the two drive bays. Each of the cables is labeled for the fan controller and temperature monitor. They range from TEMP1 to TEMP4 and FAN1 to FAN4. The Touch 2000 uses 3-pin fan connectors, so those with 4-pin molex could have a problem. There is however one 4-pin connector for PWM fans, not the four 4-pin molex.
The back panel has a blue circuit board with all of temperature and fan cables already connected. You will just need to connect the USB, audio and SATA connections if you want to use those.
[ad#review1027-bottom]