Armor A30 Overview
We are going to start with the outside of the Thermaltake Armor A30. Starting with the front of the case we have on the left side of the case a 3.5″ drive bay that is sideways along with two 5.25″ drive bays on the right side of the case.
On the bottom half of the front of the case we have the power and reset button located on the right of the case. On the other side of the case you have a USB 2.0 port, a Mic and Speaker connection, USB 3.0 port along with a eSATA port.
Let’s move to the top of the case. At the top we have 230mm fan which pulls the air out.
Now to move onto the side of the Thermaltake A30. On the side you can see the case window along with vents which are larger honeycomb shapes which allow for greater airflow to be pulled into the case.
On the back of the case you will see two 60mm case fans which also suck out hot air out of the back of the case. Also above the two 60mm fans you can see there is the power supply mount. There are 4 expansion slots for your add on cards or graphics cards.
On the other side of the case we have the large honeycomb vents along with a window but this time you will be able to see more into the case with this window.
The bottom of the case has 4 rubber feet which lift the case off the surface you would place it on.
