Back in July we took a look at the Vertex 4 solid state drive from OCZ. This was the first consumer solid state drive from OCZ to use the Indilinx Everest 2 controller. Today we are looking at OCZ’s second solid state drive to use that controller, the Agility 4. The Agility 4 features read and write speeds of 420MB/s read and 410MB/s write respectively. Since OCZ has been making solid state drives they have always had the Vertex line and Agility line. The Vertex line was always the high-end enthusiast product, while the Agility was aimed for the mainstream. It is no different here, unlike the Vertex 4 that uses synchronous NAND the Agility 4 uses asynchronous NAND and is much less expensive. As of this review the Agility 4 is $189.99 for the $256GB version. Read on as we check the Agility 4 out!
Not that long ago we took a look at the Vertex 4 from OCZ. It was the first consumer solid state drive to use the Indilinx Everest 2 controller. It is the high-end enthusiast solid state drive, but what about the mainstream and value segment? Well OCZ has you covered there as well. Introducing the Agility 4, which features the Indilinx Everest 2 controller and read and write speeds of 420MB/s and 410MB/s respectively. Read to check out our unboxing and overview video and maybe you will see us void the warranty when we open the drive up!
We all know OCZ as one of the top names in the SSD market. Believe it or not just a few years ago their main focus was enthusiast memory! The popular 3rd party solid state drive controller that everyone has been using over the past year or so has been the SandForce SF-2281 chip. Because so many companies are using the same controller the solid state drive market has become saturated with the same type of drives that offer just about the same performance. OCZ wants to remain a big player in the solid state drive market and with their purchase of Indilinx last year they made that very apparent. Earlier this year OCZ announced the second generation Everest solid state drive controller (Everest 2) and the Vertex 4 is the first consumer drive to use this controller. With rated speeds of 560MB/s read and 510MB/s write it is set to compete very well with SandForce-based drives. Read on as we check out this new drive from OCZ!
OCZ’s latest solid state drive is the Vertex 4 and unlike many of the solid state drive we have seen this year it is not powered by the SandForce SF-2281 controller. Instead it is using the Indilinx Everest 2 platform. The Vertex 4 is the first consumer drive to use the Everest 2 platform and boasts speeds of 560MB/s read and 510MB/s write! It is definitely set to compete with SandForce drives! Read on to check out our unboxing video where we give you an overview of the drive and open it up so you can get a closer look at the Everest 2 platform!
Over the past year OCZ has really made a huge push into the solid state drive space with their purchase of Idilinx, makers of flash controller silicon and software for solid state drives. This year at CES OCZ was showing off what that purchase was all about – the Everest II platform. We were shown demos of the Everest II and what it could do. Also OCZ does have a Thunderbolt drive named lightfoot. Read on to check it all out!
Jul 08, 2014 0
Jul 08, 2014 0
Jul 08, 2014 0