EK Water Blocks has unveiled the first photos of their full-coverage water block for AMD’s dual-GPU Radeon R9 295X2. The EK-FC R9-295X2 is one of the few full-coverage blocks that features coolant channels that span the entire length of the card. It is designed this way so that the coolant is distributed uniformly to both GPUs, the memory, the VRM and the PCIe bridge.
This EK-FB KIT ASUS R4BE water block kit is in itself a complete liquid cooling solution which has been designed exclusively for the ASUS Rampage IV Black Edition motherboard. The Intel X79 Express southbridge (PCH) will be directly cooled from these water blocks along with the power regulation (VRM / MOSFETs) module.
EK Water Blocks, known all around the world for providing premium quality cooling gear, has recently made an introduction of its EK-SB ASUS M6G. The Ljubljana based manufacturer has rolled out its new water block which will assist the water cooling for the Intel Z87 Express PCH which is the Periphery Hub Controller and are going to be featured on the ASUS Maximus VI Gene and Hero 4th generation Intel Core series motherboards.
It has rightly been reported that the firm is currently busy with the rolling out of its newest range of water blocks which have exclusively been designed for the all new ASUS Republic of Gamers Rampage IV Black Edition X79 LGA-2011 motherboard. And as the water blocks are still going through their development process, we will have to wait for a while till they are officially made available by the middle of next month.
EK Water Blocks has just introduced the world’s first full-cover water cooling solution for AMD’s latest R9 290X graphics card. The EK-FC R9-290X will fit any reference R9 290X and directly cools the GPU, RAM and well as the VRM. It also features a high flow design that allows it to be used in liquid cooling systems with weaker water pumps.
EK Water Blocks is a Ljubljana based manufacturer of the best quality gear which provides premium cooling solutions. It has only recently introduced its Full cover water block exclusively for the EVGA classified series of the NVIDIA GeForce GTX 780 graphics cards. The new range of water blocks by EK has been tagged as the EK-FC780 GTX Classy.
Currently, ASUS has two different designs of the of R9280X-DC2(T) series graphics cards and one of them being the initial versions, namely the ASUS R9280X-DC2(T)-3GD5-V2, extends full compatibility with EK-FC7970 DCII water block. On the other hand, the ASUS R9280X-DC2(T)-3GD5 has been redesigned hence it cannot offer compatibility right away.
EK Water Blocks has announced that their existing EK-FC series water blocks are compatible with the majority of AMD Radeon R9 280X graphics cards that were recently launched. This is because the Radeon R9 280X is based on the same Tahiti XT GPU that was used on the Radeon HD 7970 and HD 7950. So many card manufacturers have simply re-used the existing board design, most commonly known as AMD’s reference design (109-C38637).
EK Water Blocks has just introduced the EK-MOSFET ASUS M6G, which is a new water block that is made to cool the power regulation (VRM / MOSFETs) module on ASUS’s Maximus VI Gene and Maximus VI Hero motherboards.
EK Water Blocks has introduced a new full coverage water block for ASUS’s DirectCU II series of NVIDIA GeForce GTX 780 graphics cards. The EK-FC780 GTX DCII water block will directly cool the GPU, VRM and memory as water flows directly over these critical areas. This will allow the graphics card and its VRM to remain stable under high overclocks.
Dec 19, 2014 0
Dec 11, 2014 0