EK Water Blocks has just introduced the EK-FC780 GTX Ti DCII water block, which is made to work with ASUS’s Direct CU II series NVIDIA GeForce GTX 780 Ti as well as the non-Ti version as well. The water block will directly cool the GPU, RAM as well as the VRM as water flows directly over these critical areas.
PowerColor has announced the first and only (for the moment) R9 290X with a liquid cooling solution on the market. PowerColor has joined forces with EK Water Blocks to bring you the PowerColor LCS R9 290X.
EK Water Blocks, known all around the world for providing premium quality cooling gear, has recently made an introduction of its EK-SB ASUS M6G. The Ljubljana based manufacturer has rolled out its new water block which will assist the water cooling for the Intel Z87 Express PCH which is the Periphery Hub Controller and are going to be featured on the ASUS Maximus VI Gene and Hero 4th generation Intel Core series motherboards.
EK Water Blocks has just introduced the world’s first full-cover water cooling solution for AMD’s latest R9 290X graphics card. The EK-FC R9-290X will fit any reference R9 290X and directly cools the GPU, RAM and well as the VRM. It also features a high flow design that allows it to be used in liquid cooling systems with weaker water pumps.
EK Water Blocks is a Ljubljana based manufacturer of the best quality gear which provides premium cooling solutions. It has only recently introduced its Full cover water block exclusively for the EVGA classified series of the NVIDIA GeForce GTX 780 graphics cards. The new range of water blocks by EK has been tagged as the EK-FC780 GTX Classy.
EK Water Blocks has announced that their existing EK-FC series water blocks are compatible with the majority of AMD Radeon R9 280X graphics cards that were recently launched. This is because the Radeon R9 280X is based on the same Tahiti XT GPU that was used on the Radeon HD 7970 and HD 7950. So many card manufacturers have simply re-used the existing board design, most commonly known as AMD’s reference design (109-C38637).
EK Water Blocks has just introduced the EK-MOSFET ASUS M6G, which is a new water block that is made to cool the power regulation (VRM / MOSFETs) module on ASUS’s Maximus VI Gene and Maximus VI Hero motherboards.
EK Water Blocks has just introduced two new complete liquid cooling solutions for the Gigabyte Z87X-OC and Z87X-OC Force motherboards. These are of course Gigabyte’s enthusiast overclocking motherboards based on the latest Z87 chipset and support Intel’s 4th Generation Core Haswell processors. Because these are overclocking boards it makes sense for EK to make water blocks for them.
EK Water Blocks has released their first product in an upcoming line of liquid nitrogen (LN2) evaporation coolers for competitive overclockers. The EK-SF3D Triple Point EVO works in conjunction with up to four module adapters to allow users to overclock and cool (with LN2) practically any DDR-SDRAM module and of any generation.
AMD has officially released their Radeon HD 7990 graphics card today and EK Water Blocks is hard at work on a full-cover water block for the new dual-GPU card. The upcoming water block will be called the EK-FC7990 SE and will directly cool both GPUs, memory as well as the VRMs (voltage regulation module). Water will flow directly over these areas. With this block users will be able to have stable overclocks as these critical areas will be kept nice and cool.