Welcome to another Case Mod Friday showcase! This week we have Gabrielzm’s “Chessboard” build. Here is what he had to say about it, “Dual loop with redundant d5 pumps. One loop for the GPU + Aquaero 5 lt waterblock and another loop for the ram + CPU block. GPU loop – It is a reverse case so the white rads (XSPC 480 and 240) will handle the two titan blocks. This loop is with fittings in white and dark grey liquid. CPU loop – The single 560 mm HWlabs rad on the bottom compartment will handle this loop. The rad, fittings and reservoir are black with white liquid (either Aurora 2 or Pastel).”
Welcome to another Case Mod Friday showcase! This week we have GHCustomPC’s “White Metropolis” build. Here is what he had to say about it, “I wanted a build that was if a small form factor, allowing easier transportation when gaming with friends without sacrificing cooling power when at home and overclocking. I also wanted to create as clean of a build visually as I could which is where the idea for this came from. I developed a quick disconnect system from S5 to pedestal allowing me to separate the two. The name “White Metropolis” started out because I was trying to brainstorm a name that wasn’t too cliche with a white build and went with that with no intention of including the name into the theme.”
Welcome to another Case Mod Friday showcase! This week we have Tim Stokes monsterITX build. Here is what he had to say about it: I’ve built several ATX systems and decided this time around, I wanted to go mITX. I chose the Case Labs Mercury S3 case because I knew I wanted it to be a little monster. The focus for this case was to do subtle mods that kept the case looking for the most part stock, but adding touches that finished it out.
Oct 08, 2015 0
Oct 05, 2015 0