Keep in mind that though most of us in the PC Hardware website realm generally fall in or near what I call the “extreme enthusiast”, more interested in overclocking, high-end gaming, or just owning powerful rigs…pretty much what you would have considered “an enthusiast” just a few years ago. But the term “enthusiast” has changed, encompassing a large number of new “enthusiasts”…the HTPC crowd, and those with high-end workstations. So rather than purchasing the upper end memory which will generally be purchased by the extreme enthusiast or overclocker, it is more likely that the buyer will get DDR3-1600 or DDR3-1333 memory. Today I will be looking at OCZ’s Platinum DDR3-1600 Low Voltage Dual Channel 4GB Memory Kit. It sports some tight timings of 7-7-7, and meets Intel’s requirement of doing its thing at a max of 1.65 volts. An has those beautiful platinum-plated OCZ Platinum heatspreaders. Will it live up to the expectations we have for OCZ memory? Read on to see!
Regardless of what you do or even where you are from I’m pretty sure you’ve heard of Star Wars. The original movies were so revolutionary and the newer ones brought the franchise back to life. With the popularity of the Star Wars franchise you would expect there to be all kinds of Star Wars related products, but this is one of the first time I’ve seen Star Wars themed USB Flash drives. Today I will be looking at the Darth Vader USB Flash drive from Tyme Machines. Let’s see if it turns me to the dark side…
The standard for DDR3 memory is still 1.5v, but most high performance memory has voltages far above that. Many earlier high performance DDR3 modules had a Vdimm of 1.9v-2.1v. It still amazes me that the memory manufacturers were able to make DDR3 memory run at DDR3-2000 and higher at 1.65v. Today I will be looking at yet another low voltage dual channel kit, this one by OCZ, their Platinum DDR3-1333 4GB kit. It runs with timings of 7-7-7-20, at Intel’s required 1.65v. And of course these modules sport OCZ’s shiny platinum heatspreaders. Will this memory take my i7/P55 to victory? Read on to see!
It obviously wasn’t an insurmountable problem, as we saw DDR3-2000 triple channel kits not long after the release of the LGA 1366 i7, and I found that not only did they do DDR3-2000 at that voltage, they were all able to be overclocked beyond that. Now that the LGA 1156 has been released, we need dual channel kits utilizing that same low voltage requirement. That obviously was no problem, the memory was already there, they just needed packaging that held only two modules rather than three. Today I will be looking at one of Corsair’s low voltage dual channel kits, the Corsair Dominator DDR3-1600 i7/i5 4GB Dual Channel kit. It is XMP enabled, sports Corsair’s Dominator cooling fins, and timed at 8-8-8-24. Of course its Vdimm is 1.65v. Will the Dominator dominate? Read on to see!
May 02, 2015 0
May 02, 2015 0
May 01, 2015 0
May 01, 2015 0
Apr 27, 2015 0
Apr 23, 2015 0