Other World Computing (OWC), a leading zero emissions Mac and PC technology company, today introduced the OWC Mercury Accelsior M, a Mac and PC-bootable, fully supported PCIe controller card that accepts any standard 50mm mSATA Solid State Drive. By utilizing the fastest data interface available in a Mac Pro or PC-the PCIe slot-the Mercury AccelsiorM can offer data transfer speeds that exceed 3Gb/s SSDs….up to 380MB/s.
Back in July we took a look at the Vertex 4 solid state drive from OCZ. This was the first consumer solid state drive from OCZ to use the Indilinx Everest 2 controller. Today we are looking at OCZ’s second solid state drive to use that controller, the Agility 4. The Agility 4 features read and write speeds of 420MB/s read and 410MB/s write respectively. Since OCZ has been making solid state drives they have always had the Vertex line and Agility line. The Vertex line was always the high-end enthusiast product, while the Agility was aimed for the mainstream. It is no different here, unlike the Vertex 4 that uses synchronous NAND the Agility 4 uses asynchronous NAND and is much less expensive. As of this review the Agility 4 is $189.99 for the $256GB version. Read on as we check the Agility 4 out!
Mini-SATA or mSATA as most people call it was announced towards the end of 2009. It has primarily been used in laptops and netbooks where a very small solid state drive has been needed. Recently with Intel Z77 chipset we have seen many mSATA ports show up on motherboards. Today we get our first look at an mSATA solid state drive, and man is it small! The drive in question today is the Crucial M4 mSATA 256GB drive. Read on to check out our unboxing and overview video!
Not that long ago we took a look at the Vertex 4 from OCZ. It was the first consumer solid state drive to use the Indilinx Everest 2 controller. It is the high-end enthusiast solid state drive, but what about the mainstream and value segment? Well OCZ has you covered there as well. Introducing the Agility 4, which features the Indilinx Everest 2 controller and read and write speeds of 420MB/s and 410MB/s respectively. Read to check out our unboxing and overview video and maybe you will see us void the warranty when we open the drive up!
PCI-Express solid state drives are fairly new and there are only a handful of these drives available. These devices break the speed barrier on SATA 6GB/s drives by using the PCI-E interface. The most prevalent PCI-E solid state drives our OCZ’s RevoDrive series, but OCZ better watch out because the drive we are taking a look at today has a few features that the RevoDrive’s do not. The OWC Mercury Accelsior PCI-E Solid State Drive comes in capacities from 120GB to 960GB, is upgradable, and is both PC and Mac “plug and play” compatible. Want to learn more? Read on for our review!
Austin, Texas July 23rd,2012 – -Mushkin (www.mushkin.com) Add SSD performance to an existing hard drive at an economical price with the new Mushkin Catalyst Cache SSD. This simple upgrade combines the capacity of an existing hard drive with the speed of a Solid State Drive. The addition of a Mushkin Catalyst Cache SSD will accelerate boot times, application launches, and general system performance.
We all know OCZ as one of the top names in the SSD market. Believe it or not just a few years ago their main focus was enthusiast memory! The popular 3rd party solid state drive controller that everyone has been using over the past year or so has been the SandForce SF-2281 chip. Because so many companies are using the same controller the solid state drive market has become saturated with the same type of drives that offer just about the same performance. OCZ wants to remain a big player in the solid state drive market and with their purchase of Indilinx last year they made that very apparent. Earlier this year OCZ announced the second generation Everest solid state drive controller (Everest 2) and the Vertex 4 is the first consumer drive to use this controller. With rated speeds of 560MB/s read and 510MB/s write it is set to compete very well with SandForce-based drives. Read on as we check out this new drive from OCZ!
OCZ’s latest solid state drive is the Vertex 4 and unlike many of the solid state drive we have seen this year it is not powered by the SandForce SF-2281 controller. Instead it is using the Indilinx Everest 2 platform. The Vertex 4 is the first consumer drive to use the Everest 2 platform and boasts speeds of 560MB/s read and 510MB/s write! It is definitely set to compete with SandForce drives! Read on to check out our unboxing video where we give you an overview of the drive and open it up so you can get a closer look at the Everest 2 platform!
The SandForce SF-2281 controller has been powering many of the solid state drives we have reviewed in the past year or so. When these drives were first released 28% of the storage capacity was used for over-provisioning. So if you had a 128GB drive you would actually get 100GB of available space. Later this 28% was brought down to 7%, now SandForce has released a 0 provision that allows for 0% of the capacity to be used for background activities. Today we are taking a look at one of the first drives to use this 0 provision, the ADATA Premier Pro SP900.
ADATA recently released their SP800 and SP900 solid state drives. The only real difference between these drives is that the SP900 is a SATA 6G drive and the SP800 is a SATA 3G drive. Now these drives are also a little bit different from other solid state drives we have taken a look at in the past as they are some of the first 0-provision drives. This means instead of reserving 7% of the drive for provisioning it reserves nothing. We will get into all of that next week in the full review, but in the meantime check out our unboxing and overview video.
Oct 23, 2014 0
Oct 22, 2014 0
Oct 22, 2014 0
Oct 23, 2014 0
Oct 14, 2014 0