Kingston has always been the memory that comes to mind when I think of enthusiast memory. Their HyperX line of memory has been their top of the line enthusiast memory and some of the first ever enthusiast memory to be released. Today we are going to be checking out their HyperX Genesis DDR3-1600 8GB Dual Channel Memory kit (KHX1600C9D3X2K2/8GX). This kit features Kingston’s newer heatspreaders and runs at 1600MHz with timings of 9-9-9-27 at 1.65V. This kit is the perfect starting kit for someone who is looking into dual channel memory. Read on as we take a look…
Our friends over at Kingston have just sent us a 4GB kit of their Limited Edition HyperX DDR3-1600 low latency memory (KHX1600C7D3X1K2/4GX). These modules are primarily being sold overseas (Russia/Eastern Europe). They run at 1600MHz and have a CAS latency of 7 with timings of 7-8-7-20 at 1.65V. Being that this kit only runs at 1600MHz and has low timings this should leave a lot of headroom for overclocking. Read on and see how far we can push these modules.
It really has been quite some time since we have looked at memory from Kingston. Since that time Kingston has not only changed the design of their heatspreaders, but also launched their new Genesis HyperX memory as well. Today we are going to be unboxing 2 different memory kits, the HyperX Limited Edition (KHX1600C7D3X1K2/4GX) and the HyperX Genesis (KHX1600C9D3X2K2/8GX). We just want to show you the difference in the 2 memory kits and the Genesis memory up close. Read on to check out our Unboxing video!
As many of you know our friends over at Patriot were nice enough to send us over 48GB of their 8GB G2 Series single modules. That is six 8GB modules, giving us a total of 48GB of DDR3! It is really crazy to think about that much memory in a system, it is close to a small solid state drive. We’ve had a lot of fun with all of this memory over the past couple of weeks and yes we installed all 48GB in a single system. Read on to check all the fun we’ve had with this memory!
FREMONT, California — October 13th, 2011 — Corsair®, a worldwide designer and supplier of high-performance components to the PC gaming hardware market, today announced the world’s first high-performance quad channel Dominator 32GB DDR3 memory kit.
We’ve all seen different branded kits of memory, from memory that has the strangest heatsink design to SLI-ready memory. But what a lot of people haven’t really encountered before is AMD Ready memory. Today we’ll be looking at one of the few AMD Black Edition Ready Memory Kits, which work great with an AMD based system. Read on further to find out what unique AMD only software we used to help us along with the review.
Sandy Bridge, by now you all know the name and you know that Intel’s new processors blew the socks off almost anything out there. With this whole new architecture comes a new line of components made specifically for Sandy Bridge. Today we will be taking a look at some memory from our friends at G.Skill. A little while back we took a look at their 1600 MHz Ripjaws memory and today we are checking out the 2133 MHz Ripjaws-X memory, more specifically the Ripjaws-X F3-17000CL9D-8GBXLD kit. This kit runs at 2133 MHz with timings of 9-11-9-28 at 1.65v. Let’s take a look at this memory and see if it is perfect for your Sandy Bridge setup.
Taipei-Taiwan – March 22nd 2011. G.Skill, the worldwide leading memory designer and manufacturer, has announced the newest concept and development of new Sniper series designed specifically for PC gamers and modding enthusiasts. Extensive compatibility tests are conducted on a wide range of Intel® and AMD platforms, which guarantee the best performance, quality and reliability for user’s gaming needs.
The New Sniper series is designed in ultra low voltage, especially 1.25V. This kit can save up to 10% electric power which will simultaneously allow gamers to enjoy smooth gaming without any overheat problems and meet energy efficiency requirements.
Gaming takes a lot of memory consuming processes, therefore, the big capacity memory kit is necessary. G.Skill Sniper series not only fulfill your needs, but also maximize your gaming experience with the range from 4GBx2 to 4GBx6.
This Sniper series comes with two stylish colors, unique pitch-black and metallic army green. Its unparallel PC gaming style can enrich all kinds of computer gears. G.Skill is ready to pull the trigger, are you?
A little while ago we took a look at a 4GB dual channel Ballistix kit from Crucial. Today Crucial has sent us a 6GB triple channel kit of Ballistix and we are very eager to see how it performs. This 6GB kit runs at 1866MHz with timings of 9-9-9-24 at 1.65V. Just like the other kit we took a look at this kit features XMP profiles, Crucial’s new Ballisitx heatspreaders and on-board temperature sensors and monitoring software. Let’s check them out!
A little while ago we took a look at Patriot’s Viper Xtreme triple channel memory that is designed for Intel X58 systems. Today we are checking out the Viper Xtreme Division 2 Edition memory which is designed for Intel’s 2nd generation “Sandy Bridge” Core processors. This memory has been rigorously tested and validated on the Intel 6 Series platform to achieve maximum performance and stability. The Division 2 memory has all of the same features as the original Viper Xtreme memory like the 6 gram copper core and aircraft-grade aluminum heatspreaders. Today we will be putting the 8GB DDR3-1866 kit to the test.
Sep 02, 2014 0
Sep 01, 2014 0