Sandy Bridge, by now you all know the name and you know that Intel’s new processors blew the socks off almost anything out there. With this whole new architecture comes a new line of components made specifically for Sandy Bridge. Today we will be taking a look at some memory from our friends at G.Skill. A little while back we took a look at their 1600 MHz Ripjaws memory and today we are checking out the 2133 MHz Ripjaws-X memory, more specifically the Ripjaws-X F3-17000CL9D-8GBXLD kit. This kit runs at 2133 MHz with timings of 9-11-9-28 at 1.65v. Let’s take a look at this memory and see if it is perfect for your Sandy Bridge setup.
Taipei-Taiwan – March 22nd 2011. G.Skill, the worldwide leading memory designer and manufacturer, has announced the newest concept and development of new Sniper series designed specifically for PC gamers and modding enthusiasts. Extensive compatibility tests are conducted on a wide range of Intel® and AMD platforms, which guarantee the best performance, quality and reliability for user’s gaming needs.
The New Sniper series is designed in ultra low voltage, especially 1.25V. This kit can save up to 10% electric power which will simultaneously allow gamers to enjoy smooth gaming without any overheat problems and meet energy efficiency requirements.
Gaming takes a lot of memory consuming processes, therefore, the big capacity memory kit is necessary. G.Skill Sniper series not only fulfill your needs, but also maximize your gaming experience with the range from 4GBx2 to 4GBx6.
This Sniper series comes with two stylish colors, unique pitch-black and metallic army green. Its unparallel PC gaming style can enrich all kinds of computer gears. G.Skill is ready to pull the trigger, are you?
We are here to yet again do a review on another DDR3 dual channel memory kit. With the standards basically being for DDR3 kits to be 1600Mhz. They are widely used on the AMD AM3 platform to Intel 1156 and 1366 setups as well. DDR3 kits range everywhere from 1066Mhz to the 2500Mhz. When DDR3 1600MHz was coming around to be one of the most popular memory kits, the G.Skill Ripjaws where the best value for the offering. Now today a few months later we are here to put them to the test.
SAN JOSE, CA—September 14, 2010—OCZ Technology Group, Inc. (Nasdaq:OCZ, a leading provider of high-performance solid-state drives (SSDs) and memory modules for computing devices and systems, unveils new Ultra-Low Voltage (ULV) and Extreme-Low Voltage (ELV) high-speed DDR3 desktop memory, providing the optimal balance of performance and power efficiency in one solution. Committed to staying ahead of the curve, OCZ is offering enthusiast-grade memory that complies with the latest JEDEC “DDR3L” low-voltage standards which ensures that system RAM runs cooler and more efficiently during intensive multi-tasking, gaming, and productivity applications.
We have seen so many different Speeds of DDR3 ram on the market, ranging anywhere from 1066 Mhz to 2400 Mhz. The mid range ram used by most people is the DDR3 1600 Mhz. Crucial graced us with their new and upcoming ram and having seen the speeds of the ram we previously tested, we were eager to see what we could achieve. This new 4GB DDR3 kit features Crucial’s new Ballisitx heatspreaders and onboard temperature sensors and monitoring software, let’s take a look…
Up to this point the fastest memory I have owned was DDR3-2000. The guys at G.Skill contacted me recently to ask if I was interested in memory even faster than that…of course I was! G.Skill is one of those companies that I knew was out there but I had never really considered their memory in the past, as most I usually purchase from the “household name” companies. But G.Skill is not a newcomer to the memory industry, having been in business building memory since 1989. Today I will be looking at G.Skill’s latest, a DDR3-2400 4GB kit with timings of 9-11-9. This memory has been engineered specifically for the Intel Core i7 860/870 LGA 1156 processor and P55 Express chipset. Of course the memory operates at Intel’s max VDIMM of 1.65v, and it comes with a very nice cooling fan. Read on to check out the G.Skill PIS Series DDR3-2400 memory!
FREMONT, California, December 15, 2009 — Corsair, a worldwide leader in high-performance computer and flash memory products, today announced a 24GB Dominator triple-channel DDR3 memory kit designed for high-performance desktop and workstation computing applications. Corsair’s 24GB Dominator DDR3 memory kit has been rigorously tested in high-performance platforms based on the Intel® X58 motherboard chipset for Intel® Core™ i7 [Bloomfield] processors. It comprises six 4GB DDR3 DIMMs that operate at a frequency of 1333MHz, at latency timings of 9-9-9-27, with 1.65V VDIMM. The 24GB Dominator memory kit also features Corsair’s patented DHX+ heatsink technology for optimal cooling and reliability. The modules, equipped with signature American Racing Blue heatsink fins, are found on select Corsair Dominator DDR3 memory for Intel® Core™ i5 and Core™ i7 platforms in 8GB and 12GB kits.
Today I will be looking at an Intel XMP-ready DDR3-1600 6GB triple channel kit from OCZ. Besides sporting a very cool look, which I’ll show in a minute, the XMP2 setting is actually an overclock rather than a lower speed. Read on to check out the OCZ XMP Ready Series DDR3-1600 6GB Triple Channel Memory Kit!
So I find it incredible that less than six months after the release of the i7 that you can actually build a pretty awesome i7 rig at budget prices. Add to that the fact that last year the bar was raised quite a bit for video card performance, you can build a really butt-kicking i7 gaming rig for under a grand. Sure, you can spend twice that or more if you wish, but there is really no need to. Today I will be looking at OCZ’s DDR3-1600 Platinum 6GB kit. With its shiny XTC heatspreaders, 6 gigs of triple-channel goodness, and OCZ’s reputation for high quality memory, along with a low price that will really blow you away, this memory kit should be a winner. Will it pass the test? Read on to see!
Aug 28, 2015 0