It is not often that we do an unboxing of a memory kit, but since G.Skill has recently released their RipjawsZ Extreme Performance Quad-Channel Memory kits we have decided to show you what they are all about. Today we are checking out the F3-17000CL9Q-16GBZH kit. This quad-channel 16GB kit runs at 2133MHz with timings of 9-11-10-28 at 1.65V. These kits are made and certified exclusively for the Intel X79 platform. Read on to check out our unboxing and overview video!
Kingston has always been the memory that comes to mind when I think of enthusiast memory. Their HyperX line of memory has been their top of the line enthusiast memory and some of the first ever enthusiast memory to be released. Today we are going to be checking out their HyperX Genesis DDR3-1600 8GB Dual Channel Memory kit (KHX1600C9D3X2K2/8GX). This kit features Kingston’s newer heatspreaders and runs at 1600MHz with timings of 9-9-9-27 at 1.65V. This kit is the perfect starting kit for someone who is looking into dual channel memory. Read on as we take a look…
Our friends over at Kingston have just sent us a 4GB kit of their Limited Edition HyperX DDR3-1600 low latency memory (KHX1600C7D3X1K2/4GX). These modules are primarily being sold overseas (Russia/Eastern Europe). They run at 1600MHz and have a CAS latency of 7 with timings of 7-8-7-20 at 1.65V. Being that this kit only runs at 1600MHz and has low timings this should leave a lot of headroom for overclocking. Read on and see how far we can push these modules.
As many of you know our friends over at Patriot were nice enough to send us over 48GB of their 8GB G2 Series single modules. That is six 8GB modules, giving us a total of 48GB of DDR3! It is really crazy to think about that much memory in a system, it is close to a small solid state drive. We’ve had a lot of fun with all of this memory over the past couple of weeks and yes we installed all 48GB in a single system. Read on to check all the fun we’ve had with this memory!
Have you ever held 48GB of DDR3 in your hand? Maybe you have but probably not in only 6 modules! That is right these are 8GB single modules. They are Patriot’s G2 Series which run at 1333MHz with timings of 9-9-9-24. Patriot is one of the few companies making 8GB single module units so let’s open the 6 kits we received and see what they are all about. Read on to check out our unboxing video and see what we will be doing with this 48GB of DDR3!
We’ve all seen different branded kits of memory, from memory that has the strangest heatsink design to SLI-ready memory. But what a lot of people haven’t really encountered before is AMD Ready memory. Today we’ll be looking at one of the few AMD Black Edition Ready Memory Kits, which work great with an AMD based system. Read on further to find out what unique AMD only software we used to help us along with the review.
Sandy Bridge, by now you all know the name and you know that Intel’s new processors blew the socks off almost anything out there. With this whole new architecture comes a new line of components made specifically for Sandy Bridge. Today we will be taking a look at some memory from our friends at G.Skill. A little while back we took a look at their 1600 MHz Ripjaws memory and today we are checking out the 2133 MHz Ripjaws-X memory, more specifically the Ripjaws-X F3-17000CL9D-8GBXLD kit. This kit runs at 2133 MHz with timings of 9-11-9-28 at 1.65v. Let’s take a look at this memory and see if it is perfect for your Sandy Bridge setup.
Taipei-Taiwan – March 22nd 2011. G.Skill, the worldwide leading memory designer and manufacturer, has announced the newest concept and development of new Sniper series designed specifically for PC gamers and modding enthusiasts. Extensive compatibility tests are conducted on a wide range of Intel® and AMD platforms, which guarantee the best performance, quality and reliability for user’s gaming needs.
The New Sniper series is designed in ultra low voltage, especially 1.25V. This kit can save up to 10% electric power which will simultaneously allow gamers to enjoy smooth gaming without any overheat problems and meet energy efficiency requirements.
Gaming takes a lot of memory consuming processes, therefore, the big capacity memory kit is necessary. G.Skill Sniper series not only fulfill your needs, but also maximize your gaming experience with the range from 4GBx2 to 4GBx6.
This Sniper series comes with two stylish colors, unique pitch-black and metallic army green. Its unparallel PC gaming style can enrich all kinds of computer gears. G.Skill is ready to pull the trigger, are you?
We are here to yet again do a review on another DDR3 dual channel memory kit. With the standards basically being for DDR3 kits to be 1600Mhz. They are widely used on the AMD AM3 platform to Intel 1156 and 1366 setups as well. DDR3 kits range everywhere from 1066Mhz to the 2500Mhz. When DDR3 1600MHz was coming around to be one of the most popular memory kits, the G.Skill Ripjaws where the best value for the offering. Now today a few months later we are here to put them to the test.
SAN JOSE, CA—September 14, 2010—OCZ Technology Group, Inc. (Nasdaq:OCZ, a leading provider of high-performance solid-state drives (SSDs) and memory modules for computing devices and systems, unveils new Ultra-Low Voltage (ULV) and Extreme-Low Voltage (ELV) high-speed DDR3 desktop memory, providing the optimal balance of performance and power efficiency in one solution. Committed to staying ahead of the curve, OCZ is offering enthusiast-grade memory that complies with the latest JEDEC “DDR3L” low-voltage standards which ensures that system RAM runs cooler and more efficiently during intensive multi-tasking, gaming, and productivity applications.
Sep 01, 2014 0
Sep 01, 2014 0