We are back with another quad channel memory kit from G.Skill! This time it is their Ares DDR3-2133 16GB Quad Channel Kit. This kit runs at 2133MHz with timings of 11-11-11-30 at 1.60v. Since this is a quad channel 16GB kit each module is 4GB. G.Skill has designed these modules to be low-profile with very small heatspreaders. Perfect for systems with large CPU coolers and small form factor systems. The heatspreaders come in 2 different colors, blue and orange. Read on to check out our unboxing and overview video.
With Intel’s X79 chipset we started to see quad channel DDR3 memory. It is crazy to think that in just a short period of time we have gone from dual channel to quad channel memory. Not long after Intel released the X79 platform we started to see quad channel kits designed and certified specifically for the platform. Today we are taking a look at one such kit, the G.Skill RipjawsZ DDR3-2133 16GB quad channel kit (F3-17000CL9Q-16GBZH). This kit features four 4GB modules that run at 2133MHz with timings of 9-11-10-28. Read on as we take a look at our first quad channel memory kit.
It is not often that we do an unboxing of a memory kit, but since G.Skill has recently released their RipjawsZ Extreme Performance Quad-Channel Memory kits we have decided to show you what they are all about. Today we are checking out the F3-17000CL9Q-16GBZH kit. This quad-channel 16GB kit runs at 2133MHz with timings of 9-11-10-28 at 1.65V. These kits are made and certified exclusively for the Intel X79 platform. Read on to check out our unboxing and overview video!
Sandy Bridge, by now you all know the name and you know that Intel’s new processors blew the socks off almost anything out there. With this whole new architecture comes a new line of components made specifically for Sandy Bridge. Today we will be taking a look at some memory from our friends at G.Skill. A little while back we took a look at their 1600 MHz Ripjaws memory and today we are checking out the 2133 MHz Ripjaws-X memory, more specifically the Ripjaws-X F3-17000CL9D-8GBXLD kit. This kit runs at 2133 MHz with timings of 9-11-9-28 at 1.65v. Let’s take a look at this memory and see if it is perfect for your Sandy Bridge setup.
Taipei-Taiwan – March 22nd 2011. G.Skill, the worldwide leading memory designer and manufacturer, has announced the newest concept and development of new Sniper series designed specifically for PC gamers and modding enthusiasts. Extensive compatibility tests are conducted on a wide range of Intel® and AMD platforms, which guarantee the best performance, quality and reliability for user’s gaming needs.
The New Sniper series is designed in ultra low voltage, especially 1.25V. This kit can save up to 10% electric power which will simultaneously allow gamers to enjoy smooth gaming without any overheat problems and meet energy efficiency requirements.
Gaming takes a lot of memory consuming processes, therefore, the big capacity memory kit is necessary. G.Skill Sniper series not only fulfill your needs, but also maximize your gaming experience with the range from 4GBx2 to 4GBx6.
This Sniper series comes with two stylish colors, unique pitch-black and metallic army green. Its unparallel PC gaming style can enrich all kinds of computer gears. G.Skill is ready to pull the trigger, are you?
We are here to yet again do a review on another DDR3 dual channel memory kit. With the standards basically being for DDR3 kits to be 1600Mhz. They are widely used on the AMD AM3 platform to Intel 1156 and 1366 setups as well. DDR3 kits range everywhere from 1066Mhz to the 2500Mhz. When DDR3 1600MHz was coming around to be one of the most popular memory kits, the G.Skill Ripjaws where the best value for the offering. Now today a few months later we are here to put them to the test.
Solid State drives are still quite expensive for most people, especially at higher capacities. The price most manufactures are shooting for is $100. This is really had to do especially with SandForce drives. Today we will be taking a look at a 40GB drive from G.Skill, which is really close to that price-point at $119.99 at my favorite online retailer. This drive is designed to get solid state drives in the hands of consumers and to also offer great performance. The 40GB size is still more than enough room for a boot drive and is the perfect size for a netbook! Let’s take a look and see just how much performance you are getting for that low price!
We reviewed our first SandForce-based solid state drive about a month ago and since then the SandForce drives we have checked out have either been 120 or 128GB drives. While these are nice drives many people still cannot afford them. Today we will be looking at a 60GB drive that is based on the SandForce controller. The 60GB size is perfect for most systems as you can fit most of your programs and operating system on the drive then just use a regular SATA drive for all your media and other things. The 60GB size is also great for upgrading your laptop’s hard drive. Let’s check out the G.Skill Phoenix Pro 60GB Solid State Drive.
Up to this point the fastest memory I have owned was DDR3-2000. The guys at G.Skill contacted me recently to ask if I was interested in memory even faster than that…of course I was! G.Skill is one of those companies that I knew was out there but I had never really considered their memory in the past, as most I usually purchase from the “household name” companies. But G.Skill is not a newcomer to the memory industry, having been in business building memory since 1989. Today I will be looking at G.Skill’s latest, a DDR3-2400 4GB kit with timings of 9-11-9. This memory has been engineered specifically for the Intel Core i7 860/870 LGA 1156 processor and P55 Express chipset. Of course the memory operates at Intel’s max VDIMM of 1.65v, and it comes with a very nice cooling fan. Read on to check out the G.Skill PIS Series DDR3-2400 memory!
Dec 11, 2014 0