We have taken a look at a few different DDR4 memory kits over the past couple of months. The kits ranged from entry-level to high-end. Kingston’s HyperX brand is known as their high-end brand. Their best memory and solid state drives are part of the HyperX family. Of course with DDR4 being new we expected some new HyperX memory and Kingston delivered with their HyperX Predator series. This is not your typical memory, it is high-end with some of the tightest timings we have seen for DDR4 and the performance to match it. The Predator Series is available in speeds ranging from 2133 MHz all the way up to 3000 MHz. Today we will be taking a look at the HX424C12PB2K4/16 kit which is a 16 GB kit running at 2400 MHz with timings of 12-13-13-35 at 1.35V. Let’s see what this kit can do!
The first ever DDR4 memory kit that we reviewed was from Crucial and it was their standard JEDEC kit. While this memory was impressive it is not what most gamers and enthusiasts are looking for. Today we are taking a look at a second DDR4 kit from Crucial, this time it is of their Ballistix Sport DDR4-2400 memory. This memory features an operating speed of 2400 MHz with timings of 16-16-16-5 at 1.2v. The 16 GB kit that we are looking at today of course has some very attractive, yet non-intrusive heatspreaders as well. Let’s get this kit on the test bench and see what they can do!
Recently we took a look at our first DDR4 memory kit, which was from Crucial. It was their JEDEC kit so it had no XMP profile and runs at the stock 2133 MHz as well as no fancy heatspreaders. Well the kit we are taking a look at today is much different. It has a nice set of heatspreaders and runs at 2400 MHz with timings of 15-15-15-25 at 1.2V. The kit we are talking about is G.Skill’s F4-2400C15Q-16GRK kit, which is a 16 GB kit. G.Skill will also be offering these kits in three different color options so you can match them to your motherboard, case and other components. Let’s get these modules in our X99 system and see what they can do!
Intel recently launched their Haswell-E HEDT (high-end desktop) processors and accompanying X99 chipset. With that came the introduction of DDR4 memory to the consumer market. DDR4 memory has been used in server implementations, but the X99 chipset is the first consumer platform to support DDR4 memory. DDR4 brings with it faster data rates (2133 MHz standard), higher capacity levels and improved efficiency over DD3. Today we will be taking a look at our first DDR4 memory kit and it comes from Crucial. We are taking a look at their 32 GB (4x8GB) DDR4-2133 Kit (CT4K8G4DFD8213). This is Crucial’s JEDEC kit so it is not fancy at all and does not come with a XMP profile. The kit runs at 2133 MHz with timings of 15-15-15-36 at 1.2V.
Patriot has been making memory for quite some time and their Viper series has been around for a while. Now on its third revision the Viper 3 Series offers dual and quad channel kits in 8 GB, 16 GB and 32 GB capacities with speeds ranging from 1600 MHz all the way up to 2400 MHz. All of these kits are tested to work with both AMD and Intel systems and are ready to handle what you can throw at them. Today we will be taking a look at the PV38G240C0K kit, which is a 8 GB (2x4GB) kit that has a speed of 2400 MHz with timings of 10-12-12-30 at 1.65v. With its sleek heatspreaders and high speeds will the Patriot Viper 3 kit make it into your next build? Read on as we take a look…
Crucial has recently added a new line to their Ballistix Series of enthusiast memory. The Ballistix Sport XT is part of Ballistix Sport series and Crucial has aimed this kits specifically at gamers. Crucial has improved the heat spreader by making it larger, which gives it more surface area for better heat dissipation. Sport XT modules run at speeds all the way up to 1866 MHz and are available in 4GB and 8GB densities. Today we are going to be taking a look at the BLS4K4G3D18ADS3 kit, which is a 16 GB (4×4 GB) kit that runs at 1866 MHz with timings of 10-10-10-30 at 1.5v. Let’s put this memory to the test and see it is worth getting for your next build!
While Intel was showing off their DDR4 memory reference test platform at IDF13 San Francisco, Kingston was showing their own DDR4, a massive 192 GB kit! The kit was made up of 12 DDR4 16 GB 2133 MHz modules. Seeing that it was made up of 12 modules we assume that it was running on some sort of server platform rather than a normal desktop platform.
Our friends over at ADATA have hooked us up with one of their latest memory kits the XPG V2 Series DDR3-2400 8GB Memory Kit! This memory kit is just awesome, in our testing we were able to get it all the way up to DDR3-2800 speeds. Not only that the gold heatspreaders make them look just awesome in your system! To enter this contest is very simple, we will be running this contest on Facebook so here is what you need to do to enter…
Today we are taking a look at some of ADATA’s latest DDR3 enthusiast memory. The kit we are checking out today is part of the XPG V2 Series. This series is an upgrade from the original XPG series which was offered in speeds up to 2133 MHz. Now that Haswell is here and we can have much faster speeds ADATA has come out with the XPG V2 series. This series is available in a wide variety of capacities and speeds to suit pretty much anyone’s needs. The memory we are taking a look at today is their 8GB dual channel DDR3-2400 kit. This kit comes with timings of 11-13-13-35 at 1.65v and offers a very attractive gold heatspreader. Read on as we take a look…
It looks like Corsair has another first on their hands. They have just announced their new Vengeance Extreme 8GB dual channel memory kits, which are rated at 3000MHz! That makes them the world’s fastest rated production PC memory kits! These new 2x4GB kits have timings of 12-14-14-36 at 1.5V. They are air cooled and use simple “racing red” heat spreaders. Corsair will also include a Kingpin cooling memory cooler for overclockers who want to use LN2.
Jun 30, 2015 0