Our friends over at Kingston have just sent us a 4GB kit of their Limited Edition HyperX DDR3-1600 low latency memory (KHX1600C7D3X1K2/4GX). These modules are primarily being sold overseas (Russia/Eastern Europe). They run at 1600MHz and have a CAS latency of 7 with timings of 7-8-7-20 at 1.65V. Being that this kit only runs at 1600MHz and has low timings this should leave a lot of headroom for overclocking. Read on and see how far we can push these modules.
If you know anything about Kingston you know their HyperX line. HyperX is the name they give all of their high-end products. Kingston entered the solid state drive market with the SSDNow series of drives, but it was about time the put the HyperX name on a solid state drive. The HyperX solid state drive is a SATA 6GB/s drive powered by the SandForce SF-2281 controller, 25nm Intel NAND and boasts speeds of 555MB/s read and 510MB/s write. Kingston sent us the upgrade kit that includes a USB enclosure, 3.5-inch mounting bracket, SATA data cable, screwdriver and hard drive cloning software. Let’s take a look…
Kingston has made a good push into the solid state drive market with their SSDNow Series of drives, but now they are looking to really take the market by storm with their HyperX Series of solid state drives. As you may know HyperX is the name they give to all of their high performance products so we are expecting this drive to be a powerhouse! Kingston sent us the Upgrade Kit version of this drive that comes with a USB enclosure, 3.5-inch to 2.5-inch adapter, screw driver and much more. Read on to check out our unboxing and overview video!
Today, armed with a retail i7 920, and a shiny new BIOS from Gigabyte, I will have another go at this memory. Will I be successful, or will I once again end up with egg on my face? Read on to see! A quick recap, the memory runs at DDR3-2000 9-9-9-27, at Intel’s mandatory 1.65v. The modules sport some really nice pin-fin styled heatspreaders in Kingston’s traditional HyperX blue. The memory supports Intel’s XMP with a pair of preset configurations, DDR3-2000 and DDR3-1866, in case the motherboard won’t make the trip to a full 2000mHz.
In retrospect, the information that Louis had just received obviously was about the Nehalem. After seeing the improvements that the i7 has over the Core 2, I can fully understand his excitement. Today I will be looking at the result of Louis’ excitement, Kingston’s HyperX DDR3-2000 3GB Triple Channel kit. These memory modules sport beautiful new pin-fin heat spreaders and 9-9-9-27 timings at 1.65v. Will this Kingston kit carry my new i7 920 to glory? Read on to see!
Sep 01, 2014 0
Sep 01, 2014 0