A little while ago we took a look at Patriot’s Viper Xtreme triple channel memory that is designed for Intel X58 systems. Today we are checking out the Viper Xtreme Division 2 Edition memory which is designed for Intel’s 2nd generation “Sandy Bridge” Core processors. This memory has been rigorously tested and validated on the Intel 6 Series platform to achieve maximum performance and stability. The Division 2 memory has all of the same features as the original Viper Xtreme memory like the 6 gram copper core and aircraft-grade aluminum heatspreaders. Today we will be putting the 8GB DDR3-1866 kit to the test.
Corsair is a company that we all know for memory and rightfully so, their Dominator Series of memory has been the flagship for their DDR3 line for some time now. Today we will be looking at a new enthusiast line of memory called Vengeance. The Vengeance line is aggressively priced and with a lower voltage rating of 1.5V instead of the normal 1.65V you should be able to these modules to the limit. Today we will be taking a look at the 8GB 1600MHz dual channel DDR3 kit (CMZ8GX3M2A1600C9) and putting it through it’s paces. Read on to see how well them perform!
We are here to yet again do a review on another DDR3 dual channel memory kit. With the standards basically being for DDR3 kits to be 1600Mhz. They are widely used on the AMD AM3 platform to Intel 1156 and 1366 setups as well. DDR3 kits range everywhere from 1066Mhz to the 2500Mhz. When DDR3 1600MHz was coming around to be one of the most popular memory kits, the G.Skill Ripjaws where the best value for the offering. Now today a few months later we are here to put them to the test.
We have seen so many different Speeds of DDR3 ram on the market, ranging anywhere from 1066 Mhz to 2400 Mhz. The mid range ram used by most people is the DDR3 1600 Mhz. Crucial graced us with their new and upcoming ram and having seen the speeds of the ram we previously tested, we were eager to see what we could achieve. This new 4GB DDR3 kit features Crucial’s new Ballisitx heatspreaders and onboard temperature sensors and monitoring software, let’s take a look…
Up to this point the fastest memory I have owned was DDR3-2000. The guys at G.Skill contacted me recently to ask if I was interested in memory even faster than that…of course I was! G.Skill is one of those companies that I knew was out there but I had never really considered their memory in the past, as most I usually purchase from the “household name” companies. But G.Skill is not a newcomer to the memory industry, having been in business building memory since 1989. Today I will be looking at G.Skill’s latest, a DDR3-2400 4GB kit with timings of 9-11-9. This memory has been engineered specifically for the Intel Core i7 860/870 LGA 1156 processor and P55 Express chipset. Of course the memory operates at Intel’s max VDIMM of 1.65v, and it comes with a very nice cooling fan. Read on to check out the G.Skill PIS Series DDR3-2400 memory!
Keep in mind that though most of us in the PC Hardware website realm generally fall in or near what I call the “extreme enthusiast”, more interested in overclocking, high-end gaming, or just owning powerful rigs…pretty much what you would have considered “an enthusiast” just a few years ago. But the term “enthusiast” has changed, encompassing a large number of new “enthusiasts”…the HTPC crowd, and those with high-end workstations. So rather than purchasing the upper end memory which will generally be purchased by the extreme enthusiast or overclocker, it is more likely that the buyer will get DDR3-1600 or DDR3-1333 memory. Today I will be looking at OCZ’s Platinum DDR3-1600 Low Voltage Dual Channel 4GB Memory Kit. It sports some tight timings of 7-7-7, and meets Intel’s requirement of doing its thing at a max of 1.65 volts. An has those beautiful platinum-plated OCZ Platinum heatspreaders. Will it live up to the expectations we have for OCZ memory? Read on to see!
The standard for DDR3 memory is still 1.5v, but most high performance memory has voltages far above that. Many earlier high performance DDR3 modules had a Vdimm of 1.9v-2.1v. It still amazes me that the memory manufacturers were able to make DDR3 memory run at DDR3-2000 and higher at 1.65v. Today I will be looking at yet another low voltage dual channel kit, this one by OCZ, their Platinum DDR3-1333 4GB kit. It runs with timings of 7-7-7-20, at Intel’s required 1.65v. And of course these modules sport OCZ’s shiny platinum heatspreaders. Will this memory take my i7/P55 to victory? Read on to see!
It obviously wasn’t an insurmountable problem, as we saw DDR3-2000 triple channel kits not long after the release of the LGA 1366 i7, and I found that not only did they do DDR3-2000 at that voltage, they were all able to be overclocked beyond that. Now that the LGA 1156 has been released, we need dual channel kits utilizing that same low voltage requirement. That obviously was no problem, the memory was already there, they just needed packaging that held only two modules rather than three. Today I will be looking at one of Corsair’s low voltage dual channel kits, the Corsair Dominator DDR3-1600 i7/i5 4GB Dual Channel kit. It is XMP enabled, sports Corsair’s Dominator cooling fins, and timed at 8-8-8-24. Of course its Vdimm is 1.65v. Will the Dominator dominate? Read on to see!
Apr 28, 2016 0