Intel HTS1155LP active thermal solution has been designed for ultra-thin desktops and is not only compatible with Intel’s own DH61AG mainboard but also with thin mini-ITX H6x-based mainboards from other dealers. The system depends on comparatively small heatsink (weighs 264 grams), three pipes and a blower which has 1180 – 3380 rpm fan speed. For controlling the speed by firmware, the blower comes with 4-pin connector.
Intel’s first processor in the BGA package is expected to arrive by the end of this year, according to one of the leaked roadmap slides. Among the first few processors will cover across entry-level market sector, including the Celeron and Pentium brands. Motherboards with BGA processors come with the processors that cannot be the replaced and are hard-wired to the board along with a stock fan-heatsink. The SOC completely put together the processor as far as we know it, with the motherboard chipset.
We went over many of the features that will be coming to Intel’s Skylake platform yesterday. Most notably dual channel DDR4, PCI Express 4.0, SATA Express and AVX 3.2 instructions. Many people anticipated that Skylake would be a SoC (System-on-Chip) design, but the leaked slides from VR-Zone confirm that it will not be a SoC design. Just like Haswell the PCH will still be fused to the motherboard.
It has been reported by VR-Zone that Intel is preparing their new line of SSD 530 Series solid state drives that will feature the latest M.2 interface with NGFF (Next Generation Form Factor). This line will succeed Intel’s SSD 520 and SSD 525 series. According to the leaked roadmap the series should have debuted back in June, but it has been postponed till next week.
We have already detailed Intel’s Haswell-E high-end desktop platform and we know that it will feature quad channel DDR4 memory in the second half of 2014, but what about Intel’s mainstream offerings? We have heard from reports that Intel will refresh the Haswell platform in the second half of 2014, but the Broadwell micro architecture would be limited to Xeon and mobility parts. Only in 2015 will we first see a mainstream 115* 14nm Skylake processor, which will pack some interesting features.
Intel will now be headed by a new CEO who aims to make new strategic plans for the company. Brian Krzanich, who took over as a chief executive in May, believes that Intel has a great user interface and the fact that its compression-decompression technology is outstanding. He mentioned during an interview with Reuters at Intel headquarters that he is thinking about to accelerate the roll-out of chips for smart phones, tablets and wearable devices as consumers take a leap away from personal computers.
There was a rumor in the air that only K-series CPUs and Z-family platform are capable of being over-clocked. The avant-garde company ASRock has broken the restraint with a thrilling new feature called the Non-Z OC. With the help of this feature, overclockers can install their K-series CPUs to ASRocks Fatal 1ty H87 performance or H87 and B85 chipsets motherboards and start off with the over-clocking immediately.
Intel’s Ivy Bridge had issues coping with the heat problem which may have been occurred because of the low quality thermal paste under the IHS (integrated Heat spreader). It was actually tested on a 4.5 GHz over clocked i5 3570K and results showed that using a better quality of thermal paste brought a difference of 8 degrees which was used for temperature reduction purpose. If the step taken by Toppc of Coolaler.com is to be believed then Ivy Bridge-E for X79, LGA 2011 will not have to go through the same problem as it has chosen to use much stronger and stable solder, the one Sandy Bridge has got.
We have heard that Intel’s will be launching their upcoming Ivy Bridge-E HEDT (High-End-Desktop) platform in Q3 of this year. VR-Zone has confirmed this and that the launch of the new processors would take place between the 4-11 of September. A more exact date of the 9th was mentioned, but it is not official.
Just a year ago Intel launched their Ivy Bridge processors and now a year later we have another platform launch from Intel. The 4th Generation Core Haswell processors are the “tock” to Intel’s “tick” and “tock” release schedule. A “tock” represents a new architecture and a “tick” represents a process refinement. So Haswell brings with it a new architecture, but is still built on the same 22nm process as Ivy Bridge. Intel has introduced a new LGA1150 socket with Haswell and a new chipset so you will not be able to throw this processor in an older motherboard, you will have to buy a new one. Today we are taking a look at the top of the line Haswell desktop chip the Core i7-4770K. Of course the “K” denotes that it is an unlocked processor. This is a quad-core processor that has a default clock speed of 3.5 GHz and a turbo frequency that goes all the way up to 3.9 GHz.
Dec 19, 2014 0
Dec 11, 2014 0