This is my favorite part, installing anything is always a great time. The first thing I started with was installing the PCI controller. I choose to put mine in the bottom PCI slot on the computer case. Then I plugged in the Sleeved LED’s.
The next thing I choose to do was to run the sleeved LED cable. I started off with a mounting bracket right at the back of the case next to the controller to make it look good and no to do a sloppy install. From there I ran it up the back of the case to the top and then towards the front. This was pretty easy to install. Not much to it and anyone novice will be able to install the cable with ease.
Well now is the moment of truth, I fired up my machine and took some pictures of the side panel with no LEDs turned on at all.
From left to right settings from 1-3.
Now here is a shot up close to the side panel, along with a picture of the side panel off.
Feb 05, 2016 0
Feb 04, 2016 0
Feb 01, 2016 0
Jan 27, 2016 0