NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis Review


Internal Overview
The interior of the case is completely black, minus a couple of screws and wires. Inside of the case are all the necessary hardware components labeled in separate bags.


NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis

Towards the front of the case is the hard drive cage which faces the side panels and holds up to five 3.5” drives. In one of the bays is a 2.5” drive converter to hold SSD and other small drives. Above it lays another two 3.5” drive bays, one of which can be used externally. On top of that is the four 5.25” external drive bays.


NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis

In the rear of the case you’ll find a lower mounted power supply mount which has four rubber place holders as well as air holes for airflow. Above that are the seven expansion slot covers which are made of a meshed metal and secured by a screw.



NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis

Towards the top of the case you’ll find the two fans, 120mm on the rear and 140mm on the top. The white fan blades stand out with the complete black design. On the motherboard you’ll also find plenty of raised loopholes for tying cables down. You’ll also find a couple set of holes that have the same rubber housing as the two holes on the back of the case, but can be used to send cables between the back to the front of the motherboard and vice versa.


NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis

The bottom of the case also houses a small filter that can be easily removed to clean the dust from the power supply.


NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis NZXT Lexa S Crafted Series Black Steel Mid Tower Chassis

104 comments
  1. I got this case..
    I loved it !  opening the door isnt’ really a problem the problem is that I dont have many cd/dvd

  2. I think that there’s some kind of  sander or paper sand that eliminates thoses scratches
    you can also use torttle wax

  3. I have this case infact using it right now to store two radeon hd 6870 in cf..trust e its a good case clear all your doubts, it has good cable management clearance, 3 exhaust fan , systems are cooler with this case.

Leave a Reply

Your email address will not be published. Required fields are marked *