So I normally enjoy installing parts but heatsinks are never fun at all. They always just do not want to install fine the first time for me at all. Well let’s get this install going so we can fire up the system. This is going to be installed on a AMD system so we have to remove the black plastic bracket there. After this is removed we have no bracket at this point. So I started to install the top parts of the bracket but while doing so you have the CPU bracket on the back side of the motherboard tray put into the holes.
Now that you have the top completed finish off with doing the bottom bracket. At this point you have to get the heatsink on and set. Then you just have to remove the middle fan and then tighten the screws down and then it is completed and mounted. Now all you have to do is get the fans where you want them to be. Also make sure you have the fans going to correct way.
After this is all completed you have the this finished result. You will also see with there is a little bit of clearance left when you have the memory installed I used Crucial memory that just has a heat spreader on it and not a huge heatsink fin.
Feb 01, 2016 0