Installation
We will be installing the following components inside of the Stealth case.
CPU: Intel Core i5-2500K
Motherboard: Gigabyte Z77X-UD3H
Video Card: Zotac GeForce GTX 560 Ti
Memory: 8GB Kingston HyperX Genesis DDR3-1600
Cooling: Thermaltake FRIO OCK
Storage: SATA Drive and Optical Drive
Power: Antec EarthWatts Platinum 650W
The first thing you are going to want to do is install your motherboard, which easily goes in and is secured with screws.
Next is our hard drive. With most hard drive trays you have to bend them to get your hard drive secured inside, but with these it is made extremely easy. You just pull them open, line up the tool-less screws with the holes in your hard drive and push them back together to lock your hard drive in the tray. Once you have done that just slide the tray back in the case.
You can easily slide your optical drives right inside the front of the case. To lock them in place you just pull open the tool-less system and then press them into the holes on your optical drive.
Our video card is next and it easily goes right in. Remember this case can fit very long and large video cards without any issues.
The power supply slides right in to the bottom of the case. Routing the cables is actually very easy because of the large space behind the motherboard tray and the cable routing holes.
Once you have everything installed and connected the inside of the case looks pretty sweet. You can still really see all of the blues inside the case and it sort of matches our CPU cooler and the heatsinks on our motherboard. Sadly though when you put the side panel back on the case you really can’t see anything. I side panel with a window would have been really nice on this case. When you power the system on the front 120mm intake fan lights up bright blue.
