Enermax Ostrog GT Mid Tower Case Review

Installation
For step by step installation instructions see our video below.

Installation went pretty well as you can see from the video. There were no real apparent issues with installation. One thing did sort of rub me the wrong way though. The cutout for your CPU power cable gets completely covered up by any motherboard. It makes me wonder why this hole is even there. It makes no sense really and is quite deceptive actually. Also I would have liked to have seen the smaller 2.5-inch hard drive tray be able to be placed on top of the bottom hard drive cage so that the hard drive ports would be facing towards the back of the case rather than out into it.

Enermax Ostrog GT Mid Tower Case Enermax Ostrog GT Mid Tower Case

With everything installed there still is a good amount of room to work with inside the case. Since there is a lot of room behind the motherboard tray you can easily route all of your cables back there. When you turn the system on the red LEDs of the two front fans will turn on. Remember you can always turn them off if you don’t want them on.

Enermax Ostrog GT Mid Tower Case Enermax Ostrog GT Mid Tower Case Enermax Ostrog GT Mid Tower Case

About Author