Enermax Ostrog GT Overview
For a full video overview of the Ostrog GT case check out our video below.
The Ostrog GT is a mid tower case and has the official dimensions of 485 x 244 x 495 mm (DxWxH). It is mainly made up of steel construction with a plastic front bezel. Enermax is offering this case is 3 different color options, black / red, black / silver, black / blue, and all black. As you can see we received the black / red version.
Starting at the front of the case we can see the entire front has a cool mesh design. It is outlined in red with the center part being black. At the top there is a small Enermax logo and three 5.25-inch drive bays. Moving down there is a large mesh section where there are two 140mm red LED intake fans.
At the top of the case you will find all of your buttons and connections. In the center you have the power button. To the left is the restart button and to the right is a button that will turn the LEDs on the two front fans on and off. As far as connections there are two USB 3.0 ports, two USB 2.0 ports, and audio. Moving back just a little bit is a small section where you could put your keys, or maybe a flash drive. There is a large ventilated section at the top of the case where you can install a single 230 / 200mm fan or dual 140 / 140mm fans.
The side panel of the case has a nice large window that will showcase all of your installed hardware.
At the back of the case there is a 120mm exhaust fan fan. Below that there are three watercooling holes. There are a total of 8 expansion slots and a one to the far right is another slot that you can install a fan or some type of controller.
Each side panel has thumbscrews for easy removal. On the bottom of the case there are 4 large feet and two filters. These filters are not that easily removable and are pretty flimsy.