Graphite Series 600T Overview
The 600T is a very sleek looking case. The case was only offered in black up until CES were they announced the special edition white version as well. The case is a mid-tower case and has a very streamlined design.
Starting at the front of the case you have 4 5.25-inch drive bays. Each of the drive bay covers has a honeycomb design. Moving down you have the intake, which also has a honeycomb design. Way at the bottom is the Corsair logo.
If you press in on the bottom section of the front panel it will easily pop off. This allows you to easily clean it of dust a debris. It also allows us to take a look at the large 200mm intake fan.
Moving up to the top of the case there is a large knob that is a fan speed controller that can support up to 4 fans. On the left side of it are 4 USB 2.0 ports and on the right side is a single USB 3.0 port, firewire port and the audio connections sit right above the fan controller knob. The power and reset buttons are up there too, but I like how they blend in to the design of the case. Most of the top of the case has a honeycomb design, this is for the 200mm fan.
The side panel is all plain, which makes the case look very sleek. You will also notice 2 latches towards the top of the case. These are how you open the case up. This makes removing and putting the side panel back on easier and also makes the case look better.
Around back you can take a look at the 120mm exhaust fan. There is also 2 watercooling holes and you can see that the case is designed to have the power supply sit on the bottom. This is pretty much standard on most cases.
Looking at the bottom of the case there are 4 large rubber feet that will keep the case from moving around all the much. There is also a removable fan filter below where your power supply will sit.
Nov 20, 2014 0
Nov 19, 2014 1
Nov 19, 2014 0
Nov 19, 2014 0
Nov 12, 2014 0