While these fans are really no more difficult to install than any others on the market, you will want to have your manual handy to make sure you are getting the mounting style you desire.
The first thing you want to do is select your desired level of noise isolation. For our test we went with full isolation. This means attaching the rubber mount with the “L” in the direction that will make contact with your mounting surface.
Now take the plastic push pins and place one plastic washer on each. With the washers in place it’s as simple as pushing them into the hole in the rubber mounts until they’re all the way flush against the case. Of course you will need to hold the fan in place while you do this, they’re pretty tight which is good, so keep the fan steady to ensure it stays lined up with your mounting holes.
Repeat for the second fan.
Easy as that our fans are installed. Now simply attach them to a fan header, or to the included molex adapter and you’re ready to rock.
Oct 28, 2014 1
Oct 23, 2014 0