Removing the side panel reveals a complete black interior. A quick look at the side panel also shows the easy installation method for a 120mm fan, two simple clips that will snap the fan into place.
The back of the case houses the lower mounted motherboard slot, water-cooling holes, 8 expansion slots, I/O slot, and a black 120mm fan. The 200mm fan is also installed on the top of the case; both the 120mm and 200mm fans have a connection to the rear fan controller panel.
Four small rubber pads hold placed on the bottom of the case will both hold the power supply above the case and reduce vibrations.
Towards the front of the case are the nine drive bays, all facing towards the inside of the case. The nine drive bays can be used as either nine 5.25” bays, three 5.25” and six 3.5”, or six 5.25” and three 3.5” drive bays. The reason why this combination can be used is because the two hard drive cages can be easily removed and moved around. A 120mm fan mount is attached to the top hard drive cage for hard drive cooling.
Included with the case is a hardware box with all of the necessary components and a very simple User’s Manual.
Dec 19, 2014 0
Dec 11, 2014 0