Antec Kuhler H2O 620 Liquid CPU Cooler Review

Conclusion
Antec really set some high standards for their Kuhler 620 unit since its made by Asetek who also makes the H50/H70 lineup of coolers for Corsair. With having over a week to play with this cooler and testing it, it has performed better than some of the aftermarket air coolers and definitely better then stock coolers. It is worth the time to play with.

It was easy to install even novices will be able to install this pretty easy as long as they follow the directions. Also I like to put in that this cooler since it uses the rubber lines it make it where It can fit and forum to fit basically anywhere and bend to about any angle you can think of. I cannot wait to see what Antec will start to do with these coolers, maybe a thicker radiator or GPU cooler unit or 240 radiator with clear lines. Who knows the possibilities are endless. I am just massively excited to see what they do next.

The Antec Kuhler 620 performed awesome! This is a unit I would highly recommend to people who want better then air cooling along with their computer being quiet. Right now the Kuhler H2O 620 sells for about $70 online. Overall ThinkComputers gives the Antec Kuhler H2O 620 Liquid CPU Cooler an 8 out of 10 score.

Pros:
- Quiet
- Very easy to Install
- Great Cooling
- Flexible Lines
- Great Instructions

Cons:
- Plastic Tension Clip broke
- Only Hardware to mount 1 120mm Fan

Zalman Ultimate Liquid CPU CoolerStoreRatingPrice$89.98PROVANTAGE$95.80$108.99Offers by PriceGrabber.com
« Previous Page » Next Page

Pages: 1 2 3 4 5

Tags:

Related Posts

  • http://twitter.com/IERNK IERNK
    I think there’s a mistake there. 8 out of 10 score? the picture there is 9/10 :D

  • Pingback: Monday News

  • http://www.facebook.com/lawrence.jessie Jessie Lawrence
    Just a heads up all – if you get a KUHLER H2O 620 and want to set up two fans for push-pull, you need to ask for 6-32 x 1-¼ inch screws. You should be able to find these at hardware or hobby stores.
  • http://www.facebook.com/lawrence.jessie Jessie Lawrence
    Just a heads up all – if you get a KUHLER H2O 620 and want to set up two fans for push-pull, you need to ask for 6-32 x 1-¼ inch screws. You should be able to find these at hardware or hobby stores.

  • Pingback: As Young As You Feel Day | MEGATechNews :: Mega Techie Goodness For the Masses

  • http://profiles.google.com/davo1958 dave fay
    Just got one, results for stock speed Phenom II X4 965 are impressive. 3.4 X4 965 BB on ASUS M4A785-M MB. Room temp 22c, Idle 27c, Prime 95 4 hours 39c. I will test overclocking shortly.
    The kuhler h20 620 replaced a Zalman (sorry don’t know the model #) all copper, w/120mm fan.
    With the Zalman, PC would Idle at 34c and 57c at max load on stock 3.4 Ghz.. The Kuhler is very quiet and the Zalman sounded like a vacuum cleaner when the fan was adjust past 1800 RPMs.
    I need to test it some more, but so far ,so ggod.
  • Jamesy
    You could at least mention WHAT HARDWARE you had to buy to set up the push pull config.
  • Ds129
    I don’t care for a review, that adds hardware not included with the item.
    Therefore the review skewed and making it non-withstanding,
    I expected better, I want a review to tell me  “out of the box” why not go with a differrent thermal paste, other fan configurations etc etc. bogus review