Patriot has been making memory for quite some time and their Viper series has been around for a while. Now on its third revision the Viper 3 Series offers dual and quad channel kits in 8 GB, 16 GB and 32 GB capacities with speeds ranging from 1600 MHz all the way up to 2400 MHz. All of these kits are tested to work with both AMD and Intel systems and are ready to handle what you can throw at them. Today we will be taking a look at the PV38G240C0K kit, which is a 8 GB (2x4GB) kit that has a speed of 2400 MHz with timings of 10-12-12-30 at 1.65v. With its sleek heatspreaders and high speeds will the Patriot Viper 3 kit make it into your next build? Read on as we take a look…
Our friends over at ADATA have hooked us up with one of their latest memory kits the XPG V2 Series DDR3-2400 8GB Memory Kit! This memory kit is just awesome, in our testing we were able to get it all the way up to DDR3-2800 speeds. Not only that the gold heatspreaders make them look just awesome in your system! To enter this contest is very simple, we will be running this contest on Facebook so here is what you need to do to enter…
Today we are taking a look at some of ADATA’s latest DDR3 enthusiast memory. The kit we are checking out today is part of the XPG V2 Series. This series is an upgrade from the original XPG series which was offered in speeds up to 2133 MHz. Now that Haswell is here and we can have much faster speeds ADATA has come out with the XPG V2 series. This series is available in a wide variety of capacities and speeds to suit pretty much anyone’s needs. The memory we are taking a look at today is their 8GB dual channel DDR3-2400 kit. This kit comes with timings of 11-13-13-35 at 1.65v and offers a very attractive gold heatspreader. Read on as we take a look…
This time around we’re taking a look at G.Skill’s TridentX series. Starting at 2133Mhz and going all the way up to 2800Mhz, the TridentX Series is brutally fast. A black and red theme well suited to ASUS’ ROG series or ASRock’s Fatal1ty series, it looks awesome if you’re the kind of person who likes oversized or extreme styling.
The kit G.Skill have sent us is the middle of the spectrum; 2400Mhz, yet it’s only CAS 10 – speeds, with high speeds with such low latency this kit promises to be a strong performer. Lets check it out!
Samsung are well known as manufacturers of consumer televisions, laptops and other electronics. Samsung’s SSDs have been gathering traction and some rave reviews across the industry, and also picking up steam are Samsung’s offerings to the memory sector. Available in 2GB or 4GB DIMMs, with kits available for 4GB, 8GB and in some locations, 16GB, Samsung have something available for every user. Rated at 1600Mhz at only 1.35v, the kit is designed to fit into the low voltage/green market segment. With stock timings of 11-11-11-28, these kits aren’t aimed at the performance consumer.. but knowing that these DIMMs also support higher voltages, lets see how far we can push them, shall we?
Kingston has always been the memory that comes to mind when I think of enthusiast memory. Their HyperX line of memory has been their top of the line enthusiast memory and some of the first ever enthusiast memory to be released. Today we are going to be checking out their HyperX Genesis DDR3-1600 8GB Dual Channel Memory kit (KHX1600C9D3X2K2/8GX). This kit features Kingston’s newer heatspreaders and runs at 1600MHz with timings of 9-9-9-27 at 1.65V. This kit is the perfect starting kit for someone who is looking into dual channel memory. Read on as we take a look…
It really has been quite some time since we have looked at memory from Kingston. Since that time Kingston has not only changed the design of their heatspreaders, but also launched their new Genesis HyperX memory as well. Today we are going to be unboxing 2 different memory kits, the HyperX Limited Edition (KHX1600C7D3X1K2/4GX) and the HyperX Genesis (KHX1600C9D3X2K2/8GX). We just want to show you the difference in the 2 memory kits and the Genesis memory up close. Read on to check out our Unboxing video!
Have you ever held 48GB of DDR3 in your hand? Maybe you have but probably not in only 6 modules! That is right these are 8GB single modules. They are Patriot’s G2 Series which run at 1333MHz with timings of 9-9-9-24. Patriot is one of the few companies making 8GB single module units so let’s open the 6 kits we received and see what they are all about. Read on to check out our unboxing video and see what we will be doing with this 48GB of DDR3!
Sandy Bridge, by now you all know the name and you know that Intel’s new processors blew the socks off almost anything out there. With this whole new architecture comes a new line of components made specifically for Sandy Bridge. Today we will be taking a look at some memory from our friends at G.Skill. A little while back we took a look at their 1600 MHz Ripjaws memory and today we are checking out the 2133 MHz Ripjaws-X memory, more specifically the Ripjaws-X F3-17000CL9D-8GBXLD kit. This kit runs at 2133 MHz with timings of 9-11-9-28 at 1.65v. Let’s take a look at this memory and see if it is perfect for your Sandy Bridge setup.
A little while ago we took a look at Patriot’s Viper Xtreme triple channel memory that is designed for Intel X58 systems. Today we are checking out the Viper Xtreme Division 2 Edition memory which is designed for Intel’s 2nd generation “Sandy Bridge” Core processors. This memory has been rigorously tested and validated on the Intel 6 Series platform to achieve maximum performance and stability. The Division 2 memory has all of the same features as the original Viper Xtreme memory like the 6 gram copper core and aircraft-grade aluminum heatspreaders. Today we will be putting the 8GB DDR3-1866 kit to the test.
Mar 07, 2014 0
Mar 07, 2014 0
Mar 03, 2014 1
Feb 25, 2014 5