Gigabyte has just announced their premium GeForce GTX 760-based graphics card, which is the GV-N760OC-4GB or as most people will call it the GeForce GTX 760 4GB WindForce OC. The card comes with 4GB of GDDR5 memory and has a factory overclock of 1085 MHz core and 1150 MHz boost. The card also makes use of Gigabyte’s new WindForce 450W cooling solution that we have seen on many new Gigabyte GeForce 700 series parts.
Getting put through its paces today is the Inno3d iChiLL Black Edition GTX 680, with 4GB of GDDR5 memory. It is factory overclocked to 1120 Mhz, and has an aftermarket hybrid liquid / air cooler attached. The cooler itself is manufactured by Asetek, branded by Arctic, and then partnered with the inno3d card. Claiming to be virtually silent whilst many times more efficient than the reference cooler. If all goes well this card should be quite the performer. Follow us through the review as we benchmark, overclock, and generally beat the card into submission to reach our conclusion.
Our friends over at Kingston have just sent us a 4GB kit of their Limited Edition HyperX DDR3-1600 low latency memory (KHX1600C7D3X1K2/4GX). These modules are primarily being sold overseas (Russia/Eastern Europe). They run at 1600MHz and have a CAS latency of 7 with timings of 7-8-7-20 at 1.65V. Being that this kit only runs at 1600MHz and has low timings this should leave a lot of headroom for overclocking. Read on and see how far we can push these modules.
It really has been quite some time since we have looked at memory from Kingston. Since that time Kingston has not only changed the design of their heatspreaders, but also launched their new Genesis HyperX memory as well. Today we are going to be unboxing 2 different memory kits, the HyperX Limited Edition (KHX1600C7D3X1K2/4GX) and the HyperX Genesis (KHX1600C9D3X2K2/8GX). We just want to show you the difference in the 2 memory kits and the Genesis memory up close. Read on to check out our Unboxing video!
We’ve all seen different branded kits of memory, from memory that has the strangest heatsink design to SLI-ready memory. But what a lot of people haven’t really encountered before is AMD Ready memory. Today we’ll be looking at one of the few AMD Black Edition Ready Memory Kits, which work great with an AMD based system. Read on further to find out what unique AMD only software we used to help us along with the review.
We have seen so many different Speeds of DDR3 ram on the market, ranging anywhere from 1066 Mhz to 2400 Mhz. The mid range ram used by most people is the DDR3 1600 Mhz. Crucial graced us with their new and upcoming ram and having seen the speeds of the ram we previously tested, we were eager to see what we could achieve. This new 4GB DDR3 kit features Crucial’s new Ballisitx heatspreaders and onboard temperature sensors and monitoring software, let’s take a look…
Up to this point the fastest memory I have owned was DDR3-2000. The guys at G.Skill contacted me recently to ask if I was interested in memory even faster than that…of course I was! G.Skill is one of those companies that I knew was out there but I had never really considered their memory in the past, as most I usually purchase from the “household name” companies. But G.Skill is not a newcomer to the memory industry, having been in business building memory since 1989. Today I will be looking at G.Skill’s latest, a DDR3-2400 4GB kit with timings of 9-11-9. This memory has been engineered specifically for the Intel Core i7 860/870 LGA 1156 processor and P55 Express chipset. Of course the memory operates at Intel’s max VDIMM of 1.65v, and it comes with a very nice cooling fan. Read on to check out the G.Skill PIS Series DDR3-2400 memory!
Keep in mind that though most of us in the PC Hardware website realm generally fall in or near what I call the “extreme enthusiast”, more interested in overclocking, high-end gaming, or just owning powerful rigs…pretty much what you would have considered “an enthusiast” just a few years ago. But the term “enthusiast” has changed, encompassing a large number of new “enthusiasts”…the HTPC crowd, and those with high-end workstations. So rather than purchasing the upper end memory which will generally be purchased by the extreme enthusiast or overclocker, it is more likely that the buyer will get DDR3-1600 or DDR3-1333 memory. Today I will be looking at OCZ’s Platinum DDR3-1600 Low Voltage Dual Channel 4GB Memory Kit. It sports some tight timings of 7-7-7, and meets Intel’s requirement of doing its thing at a max of 1.65 volts. An has those beautiful platinum-plated OCZ Platinum heatspreaders. Will it live up to the expectations we have for OCZ memory? Read on to see!
Regardless of what you do or even where you are from I’m pretty sure you’ve heard of Star Wars. The original movies were so revolutionary and the newer ones brought the franchise back to life. With the popularity of the Star Wars franchise you would expect there to be all kinds of Star Wars related products, but this is one of the first time I’ve seen Star Wars themed USB Flash drives. Today I will be looking at the Darth Vader USB Flash drive from Tyme Machines. Let’s see if it turns me to the dark side…
The standard for DDR3 memory is still 1.5v, but most high performance memory has voltages far above that. Many earlier high performance DDR3 modules had a Vdimm of 1.9v-2.1v. It still amazes me that the memory manufacturers were able to make DDR3 memory run at DDR3-2000 and higher at 1.65v. Today I will be looking at yet another low voltage dual channel kit, this one by OCZ, their Platinum DDR3-1333 4GB kit. It runs with timings of 7-7-7-20, at Intel’s required 1.65v. And of course these modules sport OCZ’s shiny platinum heatspreaders. Will this memory take my i7/P55 to victory? Read on to see!
Mar 07, 2014 0
Mar 07, 2014 0
Mar 03, 2014 1
Feb 25, 2014 4